Make your reversing camera installation easier with a wireless 2.4 GHz transmitter and receiver set. The system sends the video signal wirelessly between the camera and screen, so you can avoid routing a long video cable through the vehicle.
This solution is especially suitable for trucks, trailers, buses and motorhomes, where cable routing can be difficult. The set can also be used in passenger cars and other compatible installations.
The set includes a TX transmitter and RX receiver that communicate wirelessly on 2.4 GHz. It is designed for stable video transmission and supports resolutions up to 1080P.
This makes it an ideal solution when it is not practical or possible to run a traditional video cable all the way from the camera to the screen.
The wireless solution is particularly relevant for larger and longer vehicles, where the distance between the reversing camera and screen makes standard cable routing more extensive.
The system can be used for:
The system has a stated range of approx. 50–200 metres with a clear line of sight. Actual range may vary depending on the vehicle construction, placement of the transmitter and receiver, and the surrounding environment.
The transmitter and receiver are equipped with external antennas to create a strong wireless connection between the camera and receiving device.
Each set includes 2 adapter cables that convert from a round 4-pin camera connector to a yellow RCA video connector. This gives you more options for connecting the system to compatible cameras, screens and video devices.
A key advantage of this system is the ability to transmit AHD, CVI and TVI video signals wirelessly. The system does not support analogue video.
Always check the video signal, resolution and connections on your camera and screen before ordering.
Buy your wireless transmitter and receiver set for reversing cameras from Carmedia24.dk.
Thank you for subscribing!
This email has already been registered!
